● 可冲孔加工,钻孔加工钻头使用寿命可延长

● 不具备UV阻挡功能


● 仪器仪表、信息家电、汽车电子、自动控制器、游戏机等

● 对于具有CAF要求的应用,建议客户对其可靠性进行系统评估。

  • 产品性能
  • 产品证书
  • 资料下载
Items Method Condition Unit Typical Value
Tg IPC-TM-650 2.4.25 DSC 130
Td IPC-TM-650 5% wt. loss
CTE (Z-axis) IPC-TM-650 2.4.24 Before Tg ppm/℃ 60
After Tg ppm/℃ 340
50-260℃ % 5.2
Thermal Stress IPC-TM-650 288℃, solder dip s >30
Volume Resistivity IPC-TM-650 After moisture resistance MΩ.cm 2.9 x 108
E-24/125 MΩ.cm 8.6 x 106
Surface Resistivity IPC-TM-650 After moisture resistance 2.8 x 107
E-24/125 4.8 x 106
Arc Resistance IPC-TM-650 2.5.1 D-48/50+D-4/23 s 115
Dielectric Breakdown IPC-TM-650 2.5.6 D-48/50+D-4/23 kV >45
Dissipation Constant (Dk) IPC-TM-650 1MHz -- 4.6

Dissipation Factor (Df) IPC-TM-650 1MHz -- 0.016

Peel Strength(1Oz HTE copper foil) IPC-TM-650 2.4.8 A N/mm
After thermal Stress 288℃,10s N/mm 1.9
125℃ N/mm 1.7
Flexural Strength LW IPC-TM-650 2.4.4 A MPa 400
CW IPC-TM-650 2.4.4 A MPa 320
Water Absorption IPC-TM-650 E-1/105+D-24/23 % 0.11
CTI IEC60112 A Rating PLC 3
Flammability UL94 C-48/23/50 Rating V-0
E-24/125 Rating V-0


1. Specification sheet: IPC-4101/12, is for your reference only.

2. All the typical value is based on the 1.6mm specimen.

3. All thetypical values listed above are for your reference only and not intended forspecification. Please contact Shengyi Technology Co., Ltd. for detailedinformation. All rights from this data sheet are reserved by Shengyi TechnologyCo., Ltd.

Explanation:C=Humidity conditioning, D=Immersion conditioning in distilled water,E=Temperature conditioning

Thefirst digit following the letter indicates the duration of preconditioning inhours, the second digit the preconditioning temperature in ℃ andthe third digit the relative humidity.